Sunbeam SL4600 Blender User Manual


 
1. Set the side switch to the ‘off’ position and
remove the plug from the power point.
2. Remove lid from the Slurples jug.
3. Remove the ice canister from the jug and
discard any remaining ice and salt.
4. Carefully lift the locking latches from the
ice paddles and disassemble the inner and
out paddles from the canister.
5. Place the ice canister, paddles, lid and
cap in warm soapy water and rinse in cold
water.
Note: The ice canister and paddles must
be seperated before washing to remove any
excess salt. Ensure that no salt is left in
contact with the cannister
6. To clean the Slurples jug rinse under
warm water. Turn the dispensing handle
clockwise to allow water to rinse through
the tap.
Never immerse the Slurples base in water.
7. Wipe the base of Slurples with a warm
cloth to clean.
Important: DO NOT PLACE ANY PART IN
THE DISHWASHER.
8
Care and Cleaning