Sunbeam SM8650 Espresso Maker User Manual


 
7
Always disconnect the Cafe Creamy™ from
the power outlet before cleaning any parts.
Note: Before cleaning after use, wait for the
appliance to cool down.
Note: Do not immerse the power base in
water or any other liquid, or allow moisture to
come into contact with these parts.
See Figure 1.
Note: Do not place any part of the appliance
in the dishwasher.
Preparing for use
Before using your Cafe Creamy™ Automatic
Milk Frother for the first time, wash the milk
jug and plastic lid in warm, soapy water.
Rinse and dry thoroughly. Repeat with the
foam blender and milk mixing attachments
located underneath the power base.
Cleaning the Milk Jug and Blending Attachment
after use
After removing the milk jug from the power
base and emptying its contents, wait for
the milk jug to cool down. Then remove the
blender attachment from the base of the milk
jug. When cleaning the inside of the milk jug
and blending attachment, hand-wash only
using a sponge or a soft brush together with
normal dish washing liquid. Be careful when
cleaning the base of the milk jug where the
heating element has contact, as it must not
be scratched.
Cleaning the power base in case of spillage
If milk spills onto the power base, switch off
the power outlet immediately and remove the
plug. Using a damp cloth gently wipe spillage
from power base. Ensure appliance is dry
before plugging into power outlet.
Note: Do not use any solvents or abrasive
agents for cleaning. Do not use and sharp
or hard instruments such as steel wool for
cleaning.
Care and Cleaning Instructions