9
NUMBER PADS(0-9)
Touch to set times, power level, weight or
amounts of food.
CLOCK
Touch to set the clock.
RESET
Clears all previous settings if touched
before cooking starts.
TURNTABLE
Touch to turn turntable on or off.
START/STOP
Touch where the [ start/stop ] is to start or
stop cooking
OPERATION INSTRUCTIONS
BEEPS DURING OVEN SETTINGS
ONE BEEP: Oven accepts the entry.
TWO BEEPS: Oven does not accept the
entry, check and try again.
SETTING THE CLOCK
1. Touch CLOCK pad. This is a 12 hour
clock system.
2. Touch CLOCK pad once more. This is
a 24 hour clock system.
3. Use the number pads to enter the
correct time. If you selected 12 hour
clock system, the digital clock allows
you to set from 1:00 to 12:59. If you
selected 24 hour clock system, the
digital clock allows you to set from
0:00 to 23:59.You must touch at least
three numbers to set the clock(one for
hour and two for minutes).
4. Touch CLOCK pad. The clock starts
counting.
NOTE:
When the oven is first plugged in or
when power resumes after a power
interruption, the display will show
ENTER CLOCK TIME, if you prefer
to not have the clock displayed, touch
RESET pad. You can check the clock
time while cooking is in progress by
touching the CLOCK pad.
SET TI NG THE OV E N TIMER
1. Touch TIMER pad.
2. Enter the amount of time you want to
count down by touching the
number pads. Digit time is in minutes
and seconds and set left to right. Set
one digit (a 5 for 5 seconds) or up to
four digits (2405 for 24 minutes, 5
seconds).
3. Touch START/STOP pad.
NOTE:
·
Time countdown can be seen in
display for 3 seconds before clock or
cooking time is returned to display.
·Touch TIMER and then touch RESET
to cancel TIMER during timing
process.
·
A long beep will sound at the end.