Filter
Top Products
15
14
4. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the FRESH BREW
™
TIMER feature. To turn the coffeemaker off, press
the BREW NOW/OFF button all lights will turn off.
5. Make sure the decanter is empty before starting to
brew coffee.
6. Be sure to turn your coffeemaker off when
no longer using it.
The Fresh Brew
™
Timer Feature
The FRESH BREW
™
TIMER feature lets you know how
long your coffee has been waiting for you. At the start
of the brew cycle, the FRESH BREW
™
TIMER feature
will automatically be activated.
Press the FRESH BREW
™
TIMER button once (Figure
8) and the clock time will change to show the amount
of time that has passed since brewing completed. Push
again to display current time.
NOTE: The BREW NOW blue light must be on
for the FRESH BREW™ TIMER feature to operate.
The time and delay brew time cannot be set
when the fresh brew time is displayed.
BREWING COFFEE LATER
1. You must first set the time for when you would like
the coffeemaker to begin brewing your coffee as
described in
Setting the Clock and the Delay Brew
Timer
section.
2. Prepare your coffeemaker as described in
Adding
Water and Ground Coffee
section.
3. To activate DELAY BREW and program your
coffeemaker to brew coffee at a later time, press the
DELAY BREW button (Figure 9). The blue DELAY
BREW light will turn on. The coffeemaker is now set
to automatically brew coffee at the pre-set later time.
At this time the brew strength light will turn on. You
can select the strength that you desire by pressing the
BREW STRENGTH button. (Amber for STRONG,
white for REGULAR)
4. At the pre-set time, the blue BREW NOW light will
turn on and the DELAY BREW blue light will turn
off, indicating the brewing has started in the selected
brew strength. The FRESH BREW
™
TIMER feature
will start.
5. The coffeemaker warmer plate will keep your coffee
hot for 2 hours and then automatically turn off.
Thermal models will turn off at the end of the brew
cycle.
As a safety feature,
your coffeemaker will NOT start
again automatically the next day. If you
want your coffee to brew at the same time the following
day, simply add a new filter, coffee
and water and set DELAY BREW, by repeating
Steps 2 and 3 above.
To cancel DELAY BREW:
Press the DELAY BREW
button until all lights turn off (Figure 9).
FIGURE 9
FIGURE 8
EJ SERIES IB-FINAL:Layout 2 10/13/2009 12:06 AM Page 14