Filter
Top Products
17
Control Probe
If cleaning is necessary, wipe over with a
damp cloth.
Note: The Control Probe must be removed
before the frypan is cleaned and the Control
Probe inlet must be dried before the frypan
is used again.
NEVER IMMERSE THE CONTROL PROBE IN
WATER OR OTHER LIQUID.
Store the Control Probe carefully. Do not
knock or drop it as this can damage the
probe. If damage is suspected, return the
Control Probe to your nearest Sunbeam
Appointed Service Centre for inspection Refer
to the separate warranty and service centre
booklet.
High Domed Metal Lid
(FP5500/FP5600/FP5610/FP5700/FP5900/SK4200)
These lids are powder coated. Wash lid in
warm soapy water using a soft sponge, rinse
and dry thoroughly. Metal scourers will
scratch the surface and should be avoided.
Some food such as tomato paste and curry
may stain the powder coat surface. This
staining may be removed or reduced by
rubbing with a cream cleanser or a paste of
bicarbonate of soda and water.
Note: Do not place metal lid in a dishwasher.
Glass Lid (FP5910)
This glass lid is dishwasher safe.
Care and Cleaning