Filter
Top Products
1. Place the appliance on a flat, dry surface
and plug the supply cord into a standard
electrical outlet.
2. Canisters: place the item(s) to be vacuum
packaged inside the canister. Place the lid
on top of the canister. See figure 1.
Bottle Stoppers: insert the Bottle Stopper
into the neck of the bottle.
Leave at least 2.5cm between the
contents and the rim. See figure 2.
3. Insert one end of the Accessory Hose
into the Accessory Port on the appliance.
Insert the other end of the hose into the
lid of canister or bottle stopper.
4. Lock the latch on the side of the
appliance before vacuuming.
5. Press 'Canister' Button to begin vacuum
process for either canisters or bottles,
motor will run until vacuum process
is complete.
6. When motor turns off, gently twist and
remove Accessory Hose from appliance
and canister or bottle stopper.
Deli Containers:
1. Place the item(s) to be vacuum packaged
inside the container*. Place the lid firmly
on top of the container.
2. Insert one end of the Accessory Hose into
the Accessory Port on your FoodSaver®
appliance.
3. Insert the other end of the Accessory Hose
into the hole on the top of the container
adaptor. See figure 3. Twist the grey tip of
hose while inserting to ensure a tight fit.
10
Fast
Normal
Moist
Dry
Vacuum & Seal
Canister
Pulse
Seal
Cancel
AUTO FUNCTION
MANUAL FUNCTION
Figure 1
Fast
Normal
Moist
Dry
Vacuum & Seal
Canister
Pulse
Seal
Cancel
AUTO FUNCTION
MANUAL FUNCTION
Figure 2
How to Vacuum Package using FoodSaver
®
Canisters, Bottle Stoppers and Deli Containers
Figure 3