Filter
Top Products
6
Before First Use
Ensure any stickers are removed from the
product. Wash in warm soapy water, rinse
thoroughly and dry your wok and lid.
Do not immerse the heat control probe in water
or any other liquid.
1. Insert the heat control probe into the
socket of the wok.
2. Plug the cord into a 230-240V power
outlet and turn the power on.
3. Set the heat control probe dial to the
desired temperature setting, or the
recommended temperature setting for your
required recipe.
Allow 5 minutes for your wok to reach the
temperature setting you have selected. The
wok is now ready to use.
Note: The thermostat light on the heat control
probe indicates the temperature at which the
dial is set.
This light will remain on until the set
temperature has been reached and then will
cycle on and off throughout cooking. This will
ensure that the wok maintains the correct
temperature.
Detachable Cook & Clean Base
Your Sunbeam Non-Stick Wok features a
quick release detachable 'Cook & Clean'
base. This enables the base to be quickly and
easily removed from the wok cooking vessel.
Simply turn the wok upside down and turn
the release dial anti-clockwise as shown in
the illustration below.
Using your Non-Stick Wok
Quick-release 'cook and clean' base