Tailgator The Original Portable Gas Powered Blender Blender User Manual


 
11
Motor Adjustments
1. It is only recommended to only adjust the idle when the
motor is unable to run consistently with out any added
throttle or, if it is determined to be idling too fast.
2. Turning the adjustment screw clockwise will increase the
idling speed. Counter clock wise will decrease the speed.
3. It may be necessary to make adjustments after extreme
elevation changes.
Warranty
TailGator® warrants to the original purchaser, from the original
date of purchase, that each TailGator® is free from defects in
material and workmanship and agrees to repair or replace any
defective product as follows;
Shipping Time - Pitcher assembly as seen on page 8 of this
manual. TailGator® warrants complete or partial replacement
of the pitcher assembly if damaged during shipping.
90 Days - Parts and labor on the power head unit including
the throttle cable.
1 year - Sealed drive bearing.
Lifetime - Parts and labor on all TailGator® fabricated parts
limited to the motor coupling (#4), trigger mount (#5), cable
mount (#6), drive shaft (#3), leg mount (#7), rubber legs (#8).
Note: Above listed numbered items are shown on opposite page.
10