Filter
Top Products
10
To remove the dispenser from the jar, please follow the steps below:
1. Turn the jar on an angle so you can grasp the dispenser easily.
2. Turn the dispenser to the unlock position (toward the unlocked padlock pic-
ture).
3. Pull out as shown. Do not force the dispenser.
1
2
• To reassemble, reverse the above procedures and make sure the dispenser is
locked in place before blending again.The small arrow on the dispenser front
will line up with the small arrow on the jar bottom where the locked padlock
picture is shown. If the dispenser is not properly locked in place, ingredients
will leak from the drain hole in the bottom of the jar.
• Reassemble all parts and store in a dry place, unplugged and away from the
reach of children. Personal injury can result if the blender is turned on when
not properly assembled.