Taylor RD30 Freezer User Manual


 
10
Models RD30/RC25Important: To the Operator
Section 5 Important: To the Operator
Figure 1
Control Switch
The control switch is located on the front of the
machine. The center position is “OFF”. The down
position is the “WASH” mode and activates the beater
motor only. The up position is the “AUTO” mode. The
“AUTO” m ode activates the beater motor and enables
refrigeration when the fill switch is inthe “ON” position.
Fill Switch
The fill switch is located on the front of the machine.
The “ON” position enables refrigeration when the
control switch is in the “AUTO” position. The “ON”
position enables the fill module to replenish and
maintain product levels in the freezing cylinder and in
the hopper. The “OFF” position terminates the fill
function. Therefrigeration systemisdisabled whent he
fill switch is in the “OFF” position.
Mix Out Light
A mix out indicating light is located on the front panel.
When the light is lit, it indicates that the hopper is
empty and the mix supply m ust be replenished. When
the indicator lights, refrigeration is automatically
disabled to prevent component damage. The beater
motor continues to run.
Viscosity Control
The viscosity adjustment screw is located o n the front
of t he unit. The viscosity (thickness) of the slush can
beadjusted by turning the adjustment s crewclockwise
for a thicker product or counterclockwise for a thinner
product.