Filter
Top Products
ENG
Components
1. Painted steel body
2. Fixed reflector
3. Liftable heating element
4. Adjustable thermostat
5. Thermoplastic feet and handles
6. Removable cooking dish with Tefal non-stick coating
7. Glass lid
Depending on model :
8. Pilot light
9. Removable drip tray
10. Removable grill plate with Tefal non-stick coating
1. Check that the voltage of your appliance is the same
as your mains.
2. Before each use, unwind the flex completely.
3. If you want to use your appliance with the grill plate
(depending on model), place the drip tray in the
appliance.
If you use your appliance in casserole function, do
not place the drip tray in the appliance.
4. Place the cooking dish or the grill plate (depending
on model) on the base of the appliance and make
sure it is stable and well positioned.
5. Switch on at the mains.
In case an extension cable is necessary, it must be
earthed, and its cross section must be at least 1 mm
2
.
When using an extension cable, secure it safely so
that people do not trip over it.
6. Set the thermostat to the position of your choice (the
positions indicated in recipes can be adjusted depen-
1. Remove all packing materials from the outside and
inside of the barbecue.
2. Clean the cooking dish, the drip tray and the grill
plate (depending on model) with hot water and wipe
it with care.
3. Wipe the interior of the dish
and the grill plate (depending
on model) with a soft coth and
a little vegetable oil.
ding on your own taste).
Note : If you use your appliance
in grill function, pre-heat it for 8
to 10 minutes at thermostat 4.
For other functions, pre-heating
is not necessary.
Warning : never put the lid on
when pre-heating the applian-
ce empty.
The pilot light (depending to
model) switchs off when the
temperature is reached.
• N.B. : on first use, it is normal
for the heating element to give
off a small amount of smoke
and odour.
Electrical details
• Power and voltage are indicated on the appliance.
• Fixed cord.
If the power supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
1
2
3
4
5
6
7
8
9
10
TECHNICAL SPECIFICATIONS
BEFORE FIRST USE
PLUGGING - PRE-HEATING
TEFAL SA has an ongoing policy of research and development and may modify these products without prior notice.