Filter
Top Products
5
ENGLISH
Before using for the first time
Unpack the appliance and remove any labels.
Read the manual and carefully follow the
instructions.
Unwind the supply cord completely.
Wipe the outside of the toaster with a
damp sponge. Dry thoroughly - Fig.
Plug in the toaster.
Without inserting any bread select the
maximum browning level - Fig.
Press the bread control lever down - Fig.
Operate the toaster 3 or 4 times while
empty to eliminate “that new smell”.
Open a window for ventilation.
Inserting the bread
With the bread control lever in the raised
position, place a slice of bread in each slot
- Fig.
Toasting
Select your desired toasting level
depending on the type and freshness of
your bread by pressing the browning
control button. The selected level will
appear on the screen - Fig.
1-2: very lightly toasted
3-4: moderately toasted bread
5-6: well browned bread
7-8: very well browned bread
9: dark browned bread
To begin toasting, press down on the bread
control lever until it locks into the low
position ; the bread slices are automatically
centred and the toasting begins - Fig.
Once the toasting cycle is engaged the
remaining toasting time appears on the
screen.
The toaster will automatically
adjust the cycle length to accommodate
any heat remaining in the toasting
chamber from a previous toasting cycle.
Any bread protruding out of the
slots will not be toasted.
The toaster must be plugged in for
the control lever to stay down.
When toasting raisin bread or tea-cakes,
remove any loose raisins from the bread
before placing them in the toaster. Loose
raisins may fall into the appliance and
create a fire hazard.
It is advisable to reduce the browning level
if you are toasting only one slice.
Regularly remove crumbs from the crumb
tray. To open the crumb tray, press on it
once. Press back in again to close - Fig.
To stop toasting
When toasting is complete, the bread
control lever will unlock and the toasted
slices of bread will pop up.
The toasting cycle may be interrupted at any
time by pressing the cancel/stop button
- Fig.
The digital screen is automatically
deactivated after approximately 10 minutes.
To activate the screen, press any of the
buttons once or press down on the bread
loading lever.
Hi-lift function
To remove small slices of bread after the
toasting cycle is complete, put the bread
control lever in the raised position and
press the Hi-lift lever - Fig.
9
8
7
6
5
4
3
2
1
Features
A LCD screen: indicates toasting selection
and remaining toasting time
B Browning control button (9 positions)
C Cancel/stop button
D Memory button
E Reheat button
F Defrost button
G Bagel/baguette button*
H Waffle/Crumpet/Brioche button*
I Bread control lever
J Hi-lift lever
K Crumb tray
L Carrying handle (on back panel)
M Cord storage (underneath)
*on selected models only
3366-AVANTI SPEED3-M1 28/08/03 17:03 Page 5