Filter
Top Products
1
1 - Characteristics
Diameter of Pressure Cooker base:
Technical informations:
Maximum operating pressure: 55 kPa (8 psi).
Maximum safety pressure: 110 kPa (16 psi).
Compatible heat sources
■
Stainless steel models can be
used on all hob types, including
induction.
■
On an electric hob, use a hotplate of a diameter
equal to or less than the diameter of the base of the
Pressure Cooker.
■
On a ceramic hob, take care that the bottom of the
pan is perfectly clean.
■
On gas, the flame should not go beyond the base of
the pan.
TEFAL accessories
■
For other spare parts or repairs contact TEFAL
After Sales Service (See enclosed list).
■
Use only the appropriate TEFAL spare parts for
your model.
2 - Closing
■
Turn the tightening knob to the left to lower the
clamp.
■
Slide the lid horizontally onto the rim of the
Pressure Cooker, making sure it sits properly on the
pan - Fig 1
■
Turn the tightening knob to the right until the clamp
is in contact with the clamp hook on the Pressure
Cooker - Fig 2
■
To ensure that the lid is locked into position, turn
the tightening knob again through (two complete
turns mimimun).
3 - Opening
■
Turn the tightening knob to the left to lower the
clamp - Fig 3
■
Lift the lid to release it.
■
Slide it horizontally away from the pan - Fig 4
4 - Filling
Minimum 25 cl (2 small cupfuls) - Fig 5
Maximum - Do not fill the unit over 2/3 full - Fig 6
For steam cooking
■
Use at least 75 cl of liquid.
■
Suspend the basket from the rivets on the pan - Fig 7
For certain foods
■
For foods which expand during cooking, such as
rice, dehydrated vegetables, or compotes, do not fill
your Pressure Cooker more than half full - Fig 8
5 - When using for the first time
■
Turn the pan upside down to fit the handles. Place
them in position, engage the screws and screw them
up tightly.
■
After using for a few days, tighten the screws again.
■
Place the pressure regulator valve on the steam
outlet and align one of the two symbols on the valve
with the valve position index. Press down fully - Fig 9
■
Turn to the “cook” position - Fig 10
■
Put the steaming basket in the base of the pan.
■
Fill 2/3 full with water.
■
Close the Pressure Cooker.
■
Place the Pressure Cooker on a source of heat at
high setting.
■
When steam begins to escape through the pressure
regulator valve, reduce the heat and wait 20 minutes
- Fig 11
■
When the 20 minutes are up, turn off the heat.
■
Reduce pressure by putting your Pressure Cooker
under the cold tap - Fig 12
■
When steam no longer comes from the pressure
regulator valve, turn the pressure regulator valve to the
steam release position and open the lid - Fig 13
GAS
SEALED (solid)
CERAMIC
HALOGEN INDUCTION
Descriptive diagram
A-Pressure regulator valve
B-Tightening knob
C-Safety valve
D-Clamp
E-Steam outlet
+ pressure valve position
F-Gasket
G-Steaming basket (depending on model)
H - Rivets
I-Clamp Hook
J-Handle
K - Fixing screw
L-Pan
Stainless steel
Capacity Base Ø Models
4,5 L 18 cm P05206
6 L 18 cm P05207
8 L 18 cm P05211
10 L 20 cm P05216
4070-ME ACTUA UK-M2.qxp 13/09/04 16:15 Page 1