Filter
Top Products
15
ENGLISH
Beer flows out
too slowly.
The tap handle is
not open all the
way.
Open the tap
completely.
The
BeerTender®
appliance is
dispensing
warm beer.
The DraughtKeg
TM
has not been
chilled long enough
and is thus not at
the right serving
temperature.
Allow the
DraughtKeg to cool
long enough in the
appliance.
The
temperature
indicator on the
control panel
does not light
up.
The BeerTender
appliance is
exposed to too hot
a temperature or
direct sunlight (see
also section 5:
Cooling the keg
and Installing the
BeerTender).
Use the appliance
indoors and move
it to a room where
the ambient
temperature does
not exceed 86°F.
Ice forms in the
cooling
chamber.
The BeerTender
has been installed
in a humid
environment.
A fault has
occurred in the
cooling system.
It is normal for a
small patch of ice
to form on the rear
of the cooling
chamber (near the
screws).
Move the
BeerTender to a dry
place.
Have the
BeerTender
repaired by an
authorized service
center.
B80 one way T-FAL US modif heineken .qxd:B80 one way SEB Uklta.qxd 25/06/08 15:10 Page 15