Filter
Top Products
11
Wipe up water from spills and
splashouts that occur around your
Thermador dishwasher.
Winterizing Your Dishwasher
CAUTION: POSSIBLE
DISHWASHER DAMAGE -
FREEZING TEMPERATURES CAN
DAMAGE THE DISHWASHER. DO
NOT ALLOW WATER TO REMAIN
IN THE DISHWASHER THROUGH
EXTENDED PERIODS OF
FREEZING TEMPERATURES.
If your dishwasher will be unused
for an extended period of time in a
location that experiences freezing
temperatures (e.g., in a holiday home
or through a vacation period), you
must drain all the water from the
dishwasher’s interior. Turn off the
water supply, disconnect the drain
hose, and allow your dishwasher to
completely drain into a bucket or
other appropriate receptacle.
Check/Clean the Filter System
Your dishwasher has a filter system
made up of a Large Object Trap/
Cylinder Filter assembly and a Fine
Filter on the floor of the dishwasher
tub. During normal use the filter
system is self-cleaning. The filter
system is accessible and and easily
cleaned.
The Large Object Trap/Cylinder
Filter assembly prevents large
objects such as bones, glass,
toothpicks, seeds, and straws from
entering the pump system and
causing damage or noise. Frequently
inspect the filter system and clean it
whenever you find foreign objects.
(Care and Maintenance, continued)
To Remove the Large Object Trap/
Cylinder Filter Assembly:
1. Grasp the ring handle, as shown in
Figure 30.
WARNING: INJURY HAZARD -
THE LARGE OBJECT TRAP COULD
CONTAIN SHARP OBJECTS. DO
NOT REACH INTO THE LARGE
OBJECT TRAP WITH YOUR
FINGERS
********************************************
********************************************
3. Carefully examine the assembly. If
you find debris in the Large Object
Trap, turn it upside-down and
gently tap it on a surface such as a
countertop to dislodge and remove
the debris. Flush the Cylinder Fliter
clean by holding it under running
water.
2. Turn the ring handle counter-
clockwise 1/4 turn , and lift out the
assembly as shown in Figure 31.
Figure 30
Figure 31
Figure 33
3. Flush the Fine Filter clean by
holding it under running water.
4. Return the Fine Filter to its position
on the tub floor and reinstall the
Large Object Trap/Cylinder filter
Assembly.
To Reinstall the Large Object Trap:
1. Place the Large Object Trap/Fine
Filter Assembly into its position in
the dishwasher floor.
3. Turn the ring handle clockwise
1/4 turn until it is locked. The arrow
on the ring handle and the arrow
on the Fine Filter should point to
each other, as shown bythe circle
in Figure 32.
4. Gently pull the ring handle to
ensure that the Assembly is locked
into place.
To Remove the Fine Filter:
1. Remove the Large Object Trap/
Cylinder Filter assembly, as
previously described.
2. Grasp the Fine Filter and remove it
as shown in Figure 33.
Figure 32
WARNING: CAUTION:
POSSIBLE MOLD GROWTH -
STANDING WATER AROUND OR
UNDER THE DISHWASHER CAN
CAUSE MOLD GROWTH THAT CAN
ADVERSELY AFFECT HEALTH AND
DAMAGE HOUSEHOLD
STRUCTURAL MATERIALS. DO
NOT ALLOW WATER FROM SPILLS
AND SPLASHOUT TO REMAIN
AROUND/UNDER YOUR
THERMADOR DISHWASHER.
********************************************
********************************************
Spills and Splashout