Filter
Top Products
Page 5
LIGHTS
NOTE: Turn off the lights and
fan. Allow the lights to cool
before handling. If new lights do
not operate be sure lights are
inserted correctly before calling
service.
Replace Lights
(HS and HST series hoods only)
Using a flat edge from a
screwdriver or equivalent tool
pry loose the lens cover as shown
in Figure 2.
Remove the damaged light and
replace with a new 12 Volt, 20
Watt (maximum) halogen light
made for a G-4 base. Follow
package directions and do not
touch new light with bare
hands.
Reinstall the light cover.
WARMING LAMPS (INFRARED).
THESE ARE AVAILABLE ON “HS”
AND “HST” SERIES HOODS AS
OPTIONAL ACCESSORY TO BE
PURCHASED APART.
Purchase and use only lamps mod.
175R-PAR, 175W maximum
infrared bulbs.
Replace Lights
(HSB series hoods only)
Turn the fan and lights off.
Remove the lamp cover (remove
the screw that fixes the lamp
cover) see Figure 3.
Remove the damaged light and
replace with a new 120 Volt, 40
Watt (maximum) bulb made for
an E27 base.
Reinstall the lamp cover and fix
in place with its screw.
Fig. 2
Fig. 3
Lamp
covers