Thermador SGSX365 Cooktop User Manual


 
PAGE 7
Match Pan Diameter to Flame Size
The flame should be the same size as the bottom
of the pan or smaller. Do not use small pans with
high flame settings as the flames can lick up the
sides of the pan.
Oversize pans that span two burners are placed
front to rear, not side to side.
Use Balanced Pans
Pans must sit level on the cooktop grate without
rocking.
Center pan over burner.
Use a Lid That Fits Properly
A well-fitting lid helps shorten the cooking time.
PROPER COOKWARE
Cookware Characteristics
Aluminum or copper bottomed pans conduct heat evenly.
Steel pans, if not combined with other metals, may cook unevenly.
Cast-iron cookware absorbs heat slowly and cooks more evenly at low-to-medium settings.
Flat, heavy bottom pans provide even heat and stability.
DO NOT USE pans that are thin, warped, dented or ridged as they heat unevenly.
Pans that span 2 burners, i.e. griddles, roasters and fish poachers, may be used when placed front to
back. Adjust flame equally to cook evenly. Use the Thermador® accessory griddle Model SGRIDDLE.
Use a Wok with a flat bottom. If using a round bottomed wok, use the Thermador accessory support
wok ring, Model SWOKRING. For additional information refer to your local dealer.
Canners and pressure cookers must meet the same requirements as described above.
After bringing contents to a boil, use lowest heat setting possible to maintain a boil or pressure (for
pressure canners/cookers).
Thermador Customer Service (800) 735-4328