Filter
Top Products
And More
Pulse Mode allows you maximum control over the
vacuum process for crushable items in bags. The
Pulse feature operates similar to the Pulse button on
a blender. After placing bag in Vacuum Channel
(K)
and closing lid, follow these instructions:
1. Set Seal Control Switch (E) to Pulse Mode.
2. Press down firmly on lid to activate motor, then
release.
3. Press Pulse Button (G) and hold for as long as
desired, then release. Indicator Light
(F) will flash
quickly after Pulse Button is used. To remove
more air, simply repeat Step 3.
4. After removing desired amount of air, press
Instant Seal Button
(D) to seal bag. Indicator Light
will flash slowly when bag is sealing.
5. When motor and light turn off, vacuum process
is complete.
Tip: When using Pulse Mode, you must press Instant
Seal Button to seal bag. If there is no activity for 30
seconds, appliance will shut off automatically and
bag will not be sealed.
The Instant Seal Button
(D) stops the vacuum process
early and seals the bag, preventing fragile foods such
as cookies from being crushed.
1. Vacuum package as described in previous sections.
2. To stop process before all air is removed, press and
release Instant Seal Button. Vacuum process will
stop within a few seconds and bag will be sealed.
3. When motor and Indicator Light (F) turn off,
open lid and remove bag.
The Instant Seal Button is also used to end Pulse
Mode (see instructions above).
If you want to seal a bag without vacuuming, use the
Seal Only position on the Seal Control Switch (E).
You can even reseal non-FoodSaver bags such as
Mylar
®
potato chip bags.
1. Place open end of bag on Sealing Strip (N) and
close lid.
2. Set Seal Control Switch to Seal Only.
3. Press down firmly on lid with both hands until
motor starts, then release. Motor and Indicator
Light
(F) will turn on, indicating bag is sealing.
4. When motor and Indicator Light turn off, open lid
and remove bag.
Note: If Sealing Strip is too hot for a non-FoodSaver
bag, try setting Seal Control Switch to instead of
Seal Only. As long as you place open end of bag on
Sealing Strip (not in Vacuum Channel), no air will be
removed.
1
Additional Features
Pulse Mode
Instant Seal
Seal Only
QS.1505_GSpro_v3 6/29/04 11:13 AM Page 4