FoodSaver V2420 Food Saver User Manual


  Open as PDF
of 6
 
Bags & Rolls
Accessories
FoodSaver Accessory Guidelines
FoodSaver Accessories
Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.
1. Always leave at least one inch of space between
contents and rim.
2. Wipe rim of canister, container or bottle to
ensure it is clean and dry.
3. Place lid on canister or container, or place stopper
in bottle.
4. For accessories with a large knob on lid, turn knob
to
Vacuum. Vacuum package using instructions
below. When vacuum process is complete, turn
knob to
Closed before removing Accessory Hose.
5. For accessories without a large knob on lid, vacuum
package using instructions below.
How to Open FoodSaver Accessories after Vacuum Packaging
FoodSaver Vacuum Packaging Canisters
(without large knob on lid)
To release vacuum and open, push gray rubber
button on lid.
Quick Marinators (with large knob on lid)
and Universal Lids
T
o r
elease vacuum and open, tur
n knob on lid
to
Open.
FoodSaver Jar Sealer with Mason Jars
For use with Ball
®
and Kerr
®
brand Mason jars.
IMPORTANT: Do NOT use screw bands when
vacuum packaging jars. To open, wedge spoon
between Mason jar lid and highest part of threaded
rim. Twist spoon gently to release vacuum.
F
oodSa
v
er Bottle Stoppers
To release vacuum and open, twist and pull up on
Bottle Stopper.
How to Vacuum Package with FoodSaver Accessories
1. Prepare container according to FoodSaver
Accessory Guidelines above.
2. With lid closed, insert one end of Accessory
Hose
(A) into Port (M) on appliance. Insert other
end into port on accessory. Twist gray tab while
inserting to ensure a tight fit.
3. Lock the Latch (D) on side of appliance
before vacuuming.
4. If vacuum packaging in a large canister, push
Fast Speed Setting (N) button.
5. For models V2420, V2440, V2480, push Canister
Vacuum Button
(P) to begin vacuum process.
For model V2460, push the Vacuum & Seal
Button
(O). Motor will run until vacuum process
is complete.
6. When motor turns off, gently twist and remove
Accessory Hose from accessory and appliance.
Unlock Latch.
7. To test vacuum, simply tug on accessory lid.
It should not move.
Note: For important tips on using accessories with
different foods, please refer to the
FoodSaver
Reference Guide.
 previous next