Filter
Top Products
HOW TO USE
How to Brew Coffee
1. Fill your favorite cup/mug with fresh cold water. Pour into the Water
Reservoir. NOTE: Minimum amount of water is 5 oz. (142 ml), maximum
10.5 oz. (300 ml). Please see the markings on the water level window for
the maximum water capacity. Do not overfill.
2. Place the cup/mug on the Cup/Mug Rest.
3. Swivel the Water Spreader to the left. Fill the Permanent Coffee Filter with
approximately 1 tbsp. (15 ml) or 1 scoop of filter coffee grounds for every
5 oz. (142 ml) of coffee. Return the Water Spreader to its original position.
4. Plug unit into a 120 Volt A.C. outlet.
5. Press the On/Off Switch to the On position.
6. Once the coffee has finished dripping into the mug, press the On/Off
Switch to the “Off” position.
7. Unplug unit from outlet or follow directions above to prepare another
cup of coffee. Be careful when opening the Reservoir Cover when the
unit it hot.
How to Heat Water for Tea, Hot Chocolate, etc.
1. Fill your favorite cup/mug with fresh cold water.
2. Pour into the Water Reservoir.
NOTE: Minimum amount of water is 5 oz.
(142 ml), maximum 10.5 oz. (300 ml).
3. Swivel the Water Spreader to the left and remove the Permanent Coffee
Filter. Return Water Spreader to its original position.
4. Add tea bag, hot chocolate, or instant foods etc. to the cup/mug
and place on the Cup/Mug Rest
5. Plug unit into a 120 Volt A.C. outlet.
6. Press the On/Off Switch to the “On” position.
7.
IMPORTANT: Once the water has finished dripping into the mug,
press the On/Off Switch to the “Off” position.
8. Unplug unit from outlet or follow directions above for more hot water.
Be careful when opening the Reservoir Cover when the unit it hot.
4
SAL6-472 Booklet_VF_EN 09/05/06 10:56 Page 4