Filter
Top Products
3.
Using Your Juicer
Please fill out information that follows warranty.
1. Before using, wash all removable parts, see CARE AND
CLEANING.
2. Insert the shaft down into the motor base.
3. Place container on base by aligning the arrows on the base and
container; press down (See Figure 2). Turn the container
clockwise until it locks into place. Line up the icon on the
base and the icon on the container. Do not force the
container beyond this point.
4. Place the Adjustable Strainer on the Strainer Base. To do this,
line up the notches in the Adjustable Strainer with the tabs on
the strainer base (See Figure 3). Press down until the Adjustable
Strainer snaps into place.
5. Place the strainer base over the top of the container, as shown.
6. Place the small cone over the center of the strainer. Use this
cone for small fruit such as lemons and limes. For larger fruit
such as grapefruit and oranges, place the large cone over the
small cone.
7. Unwrap cord and plug unit into 120 V ~ 60 Hz outlet.
8. Push down on the cone assembly with halved fruit to start juicing
action. Do not use excessive force. The juicer will automatically
reverse direction periodically to make juicing easier. To stop, lift
the fruit from the cone assembly.
9. Unplug and carefully remove container by holding the handle
and turning counter-clockwise to release; remove from the base.
10. Remove cone assembly from the container. Use container to
serve juice.
•