Filter
Top Products
7
USING YOUR HEAVY DUTY STAND MIXER
1. Place mixer on a large secure surface and turn to Off position.Make sure the
counter is clean so the rubber feet can grip the countertop. Unwind cord and
plug into 120V ~ 60 Hz outlet. A safety protective cap is provided to place
over drive mechanism “c”.
2. Hold the speed control dial in the park setting, (see figure 3). For further
details, refer to “Park Setting Operation.”
3. Press the release button and move the swivel arm to position 2, (see figure
5). Insert the small rim on the base of the bowl into the slots on the mixer
base, (see figure 6). Insert the whisk, beater or dough hook until it locks into
place, (see figure 7).
4. Add the ingredients to the mixing bowl according to recipe or package direc-
tions. Press the release button and move the swivel arm to the work position
3, this will lock the bowl into place.
NOTE: It may be necessary to rotate the pastry deflector on the dough hook until it
fits over the drive mechanism.
5. Slide the splatter guard securely in place. The splatter guard prevents splat-
tering at the start of the mixing and kneading process.
6. To turn on the stand mixer, move the speed control to the desired speed.
NOTE:To add ingredients you may either remove the splatter guard or pour through
the splatter guard opening.We recommend turning the stand mixer off when remov-
ing the splatter guard.
7. Turn mixer off, remove splatter guard and scrape bowl as necessary during
mixing process.
8. When finished mixing, turn the dial to the Off position.
9. Before removing the mixing attachment, the drive mechanism must be
placed in the park position.See “Park Setting Operation” for details. DO NOT
attempt to remove an attachment when the drive mechanism has not been
parked.The attachment will not be in a position that allows you to lift the swiv-
el arm out of the bowl.
10. Unplug from outlet and remove splatter guard. Press the release button and
raise the swivel arm to position 2 until it locks into place.
11. Remove the whisk, beater, or dough hook and then the mixing bowl.Refer to
cleaning instructions.
CLEANING
1. Unplug the stand mixer and wrap the cord around the cord storage.
2. The mixing bowl, splatter guard, whisk, beater and dough hook may be
washed in the dishwasher. Make sure the mixing bowl is not bent between
the dishwasher racks or it may warp.
3. Wipe the stand mixer with a damp cloth. Do not use any abrasive cleaning
materials. Never immerse it or clean it under running water.
SERVICE INFORMATION
Please refer to warranty statement to determine if in-warranty service applies.
This appliance must be serviced by a Toastmaster authorized service center.
Unauthorized service will void warranty. Consult your phone directory under
“Appliances-Household-Small-Service and Repair,” or call 1-800-947-3744 in the
United States and Canada, 52-5-397-2848 in Mexico.
If an authorized service center is not available locally, your appliance may be