Filter
Top Products
5.
Getting to know your Toastmaster
Under-Cabinet Can Opener
Your product may vary slightly from illustration.
Mounting
Bracket
(P/N 70635)
4 screws
(P/N 70638)
Removable
Piercing Lever
(P/N 70637)
Bottle Opener
Magnetic Lid
Holder
Bag Opener
Knife sharpener
Cord Storage
(not shown)
Removable
Locking Knob
(P/N 706336)
FIGURE 5
How To Use Your Under-Cabinet
Can Opener
1. Attach Piercing Lever as shown in Figure 6.
2. Raise piercing lever and place the rim of a can at an angle behind
the piercing lever.
3. Lower the piercing lever. This starts the cutting action. The lever
will remain down until the lid is completely cut. Then it will stop
automatically.
4. Hold the can and raise the lever to release the can.
5. Carefully slide the lid away from the magnet.
TMR_2246CAN_IB_25-11-04 11/25/04 3:42 PM Page 5