Filter
Top Products
POLARIZED PLUG: This appliance has a polarized plug, (one blade is wider
than the other). As a safety feature to reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
ELECTRIC POWER: If the electric circuit is overloaded with other appliances,
your appliance may not operate properly. It should be operated on a
separate electrical circuit from other appliances.
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY
Operating Instructions
Before using the single burner for the first time, operate the burner once to
burn off residues on the heating element. When doing this, we suggest
using the high heat setting.
• Place the single burner on a flat, smooth countertop surface. Be sure to
place it in a safe area. Make sure that the cord is not in a position where
it can be pulled off the countertop. There should be at least 4-6 inches
of space above and around the unit for proper air circulation.
CAUTION: NEVER OPERATE THE UNIT IN A TILTED POSITION.
• Plug the burner into electrical wall outlet. To operate burner, adjust the
variable temperature control to the desired heat setting. The power
indicator light will illuminate and remain lit until the selected
temperature has been reached. The light will then cycle on and off until
burner is turned off.
For best results: Turn on the burner for approximately 1 minute before
placing a pot or pan on it.
• When finished turn the variable temperature control to the “O” position.
WARNING: BE SURE TO TURN BURNER OFF COMPLETELY AND
UNPLUG AFTER EACH USE. NEVER LEAVE BURNER PLUGGED IN
WHILE IT IS NOT IN USE.
FOR BEST RESULTS
•
It is recommended to use pots or pans that are essentially the same size
as the burner. A pot or pan should always be placed on the center of
the burner.
• Burner works similarly to stovetop burner and features a full range of
heating options.
ALWAYS TURN BURNER OFF AND UNPLUG WHEN NOT IN USE.
3