Filter
Top Products
This appliance required little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Any servicing
requiring disassembly must be preformed by a qualified appliance
repair technician.
CLEANING YOUR JUICER
THE JUICER SHOULD BE CLEANED AFTER EVERY USE...
• Make sure that the Juicer is unplugged from the outlet; then follow
the DISASSEMBLY INSTRUCTIONS.
•
TO CLEAN THE MOTOR BASE:
Do not immerse the Motor Base in water or spray it with water.
Clean only by wiping with a damp sponge, cloth, or paper towel.
Using a sponge, wipe off the Motor Base, rubber feet and the
underside of the Juicer. Use a damp toothbrush or cloth to clean
juice from inside the Motor Base Hub (on top of the Motor Base).
THE JUICER SHOULD BE AIR-DRIED ONLY!
• All Juicer parts (except the Motor Base) are washable in warm,
soapy water, using any liquid dishwashing detergent.
DO NOT USE ANY PRODUCTS CONTAINING AMMONIA OR
SCOURING POWDERS -- These products will dull, scratch or mar
the plastic surface.
•
TO CLEAN THE CLEAR LID & JUICE BOWL:
We recommend using a fruit and vegetable brush with natural
fibers. Do not use a metal brush or pad.
13
USER MAINTENANCE
INSTRUCTIONS
ALWAYS UNPLUG THE JUICER FROM THE OUTLET BEFORE
ASSEMBLING OR REMOVING PARTS AND BEFORE CLEANING.
CONTROL PANEL
This Juicer has a unique control panel, offering two speed options: HIGH
and LOW. These two speeds ensure optimal rpm to provide maximum
juicing efficiency (efficiency describes the amount of juice extracted from
your produce). Speeds are selected by simply pressing the “Hi” Button
(HIGH Speed) and the “Lo” Button (LOW Speed).
6
Best for harder produce: carrots, ginger-
root, beets, and pineapple (with rind).
Best for softer produce: citrus, apples,
grapes (with stems), melons, peaches
(remove pit), and tomatoes. This speed
setting is also recommended for ripe
produce that has become soft.
Press the Button to pause or turn off
the Juicer.
HIGH SPEED:
Screen displays: SP:2
LOW SPEED:
Screen displays: SP:1
OFF:
Juiceman_JM502_IB_14-6-06 6/14/06 8:07 PM Page 13