Filter
Top Products
STEP ONE: Remove Clamps
Firmly grasp the hinge-end of the Clamp
and pull out to unlock; then lift the top of
the Clamp up/out to unhook from the
Clear Lid. Repeat for the opposite Clamp.
STEP TWO: Remove Clear Lid
Grasp the Clear Lid by the Feed Tube; lift
and remove from the Juice Bowl. Make
sure to hold the Food Pusher in place if it
is being stored inside the Feed Tube.
STEP THREE: Remove Juice Bowl
Grasp the sides of the Juice Bowl with
both hands. With the Filter Basket still
inside, carefully lift the Juice Bowl off of
the Motor Base -- rotating slightly if
necessary. The Filter Basket can then be
removed from the Juice Bowl for easy
cleaning.
CAUTION: Use care when handling Filter
Basket; the Cutting Blades are very sharp!
12
DISASSEMBLY INSTRUCTIONS
ALWAYS MAKE SURE THE JUICER IS UNPLUGGED
BEFORE STARTING TO DISASSEMBLE.
BEFORE FIRST USE
The Juicer comes almost completely assembled in the box. We suggest
taking it apart and washing the removable parts in warm water with a
biodegradable, non-abrasive liquid detergent before the first use. This will
eliminate any traces of dust or residue from manufacturing or shipping.
NOTE: The Juicer may be shipped with a protective cardboard insert
between the Feed Tube and Cutting Blade (in the Filter Basket). Remove this
and any other protective packaging before using the Juicer.
CAUTION: Never rinse or immerse the Motor Base in water or any
other liquid.
Refer to the ASSEMBLY and DISASSEMBLY INSTRUCTIONS. Make sure
the Juicer is properly and completely assembled before use. The Juicer will
not turn on unless pr
operly assembled.
7
Juiceman_JM503_IB_28-3-07 3/28/07 3:38 PM Page 15