Filter
Top Products
6.
4-Cup Coffee Maker Use and Care Guide
Brewing Instructions (Cont.)
7. If you wish to serve a cup of coffee before brew cycle is completed,
simply remove Carafe from Warming Plate. Dripping will automat-
ically cease. Return Carafe to position on Warming Plate within 20
seconds; dripping will resume.
8. Upon completion of the brew cycle, wait about one minute until
the brew dripping from the Filter Holder into the Carafe has
stopped. Carafe Lid should be kept in place to facilitate safe
serving and help keep coffee at proper serving temperature.
9. To keep coffee hot, return Carafe to the Warming Plate after serv-
ing. The Warming Plate will automatically cycle to maintain ideal
serving temperature as long as the Coffee Maker is ON.
10. Switch Coffee Maker to OFF (O) when Carafe is empty or when
unit is not in use.
11. To brew another Carafe of coffee, turn unit OFF and wait 10
minutes to allow heating element to cool.
IMPORTANT: If unit is not allowed to cool before immediate repeat-
ed use, water placed in Water Chamber may become overheated and
a spray of steam could be released from opening, creating a risk
of burns.
Brewing a Second Pot of Coffee
As mentioned above, it is recommended that the Coffee Maker should
be in OFF (O) position for 10 minutes between cycles, in order to
allow unit to cool. While unit is in OFF position, rinse Carafe in water
and dispose of filter and coffee grounds.
Repeat brewing procedure.
Hints for Great Tasting Coffee
A clean Coffee Maker is essential for making great tasting coffee.
Regular cleaning, as specified in “Care and Cleaning” section on
page 7–8 is highly recommended.
Always use fresh, cold water in your Coffee Maker.
Maxim_MAXCM4_IB_22-4-06 4/22/06 3:54 PM Page 6