Filter
Top Products
Before Using For The First Time
Carefully unpack Hand Mixer. Wash Beaters in warm, soapy
water. Rinse well and dry thoroughly. Wipe Mixer with a soft, clean
cloth or sponge. Never immerse your Hand Mixer in water or any
other liquid.
Instructions For Use
1. Make sure Hand Blender is unplugged from electrical outlet.
2. Position the Speed Control Lever to the OFF position.
3. Attach Beaters following the instructions outlined below.
4. Plug into 120 V AC household outlet.
5. Place Beaters in container holding ingredients,. Slide the Speed
Control Lever to the desired Speed Setting.
Attaching Beaters
1. Make sure Hand Blender is unplugged from electrical outlet.
2. Align notches on Beaters with slots on the unit, and push until they
click and lock into place.
3. Insert plug into any standard 120V AC household outlet.
4. Place Beaters directly into container holding ingredients to be
mixed. Set the Speed Control Lever to the desired setting.
CAUTION: Always unplug Mixer from outlet before installing or
removing Attachments.
Removing Beaters
1. Make sure Hand Blender is unplugged from electrical outlet.
2. Slide Speed Control Lever to the OFF position.
3. Push down on the Beater Eject Button to eject Beaters.
CAUTION: UNPLUG APPLIANCE FROM ELECTRICAL
OUTLET BEFORE ASSEMBLING, REMOVING PARTS OR
CLEANING. NEVER PLACE MOTOR HOUSING OR CORD IN
WATER OR OTHER LIQUIDS.
®
Using
Your 6-Speed
Hand Mixer
PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS
MAXHM5CAN Use and Care Guide3.
Speed
Control
Lever
Beater Eject
Button
Motor Housing
Easy-To-Hold
Handle
Chrome
Plated
Beaters
(P/N 70892)
Cord Wrap
FIGURE 2
FIGURE 1