Toastmaster TLWTOB6CAN Oven User Manual


 
11.10.
Lightwave Oven Use and Care Guide
Preset Functions (cont.)
4. Open the Glass Door and place your food in the Lightwave Oven. Close
Glass Door.
5. Press the Start/Stop button. The Timer will begin to count down and
“min.” will flash in the Display Window.
6. Condensation may build-up on the inside of the Glass Door, but will
evaporate during Preset Function.
7. The Lightwave Oven will beep 5 times when the program is complete.
8. Open the Glass Door. Using oven mitts remove hot pan, Wire Rack and
food. Close Glass Door.
9. Unplug oven and allow to cool completely before cleaning. See User
Maintenance Instructions. Unplug when not in use.
NOTE: To change cooking time during baking process, you must start
the programming sequence over. Press and hold the Stop button until
beep is heard. The default time will appear in the Display Window.
Reprogram the time and/or function and press the Start button to
resume the cooking process.
Hints For Cooking
Heavy-duty aluminum foil may be used to cover top of baking container
to reduce over browning. Tuck ends of foil closely against edge of pan.
Place food in the center of the Lightwave Oven for better browning.
Food may cook faster than recipe or package time. Check for
doneness prior to end of cook time.
Rotate and turn food over for more even browning halfway through
the cooking process.
To prevent heat loss, avoid opening the Glass Door excessively.
For best results, foods that contain a leavening agent should be
baked on the lowest Shelf Position of the Lightwave Oven.
Always use the Broil Insert and Bake/Broil Pan with the Broil
function.
Lightwave Oven Tips
The Lightwave Oven has preset temperatures for each function to cook
frequently prepared foods. The temperature can not be adjusted.
The Lightwave Oven has a 2 hour timer.
The Operation Light on the Control Panel will be on while the
unit is plugged in.
The oven will beep 5 times when the program is completed.
The Lightwave Oven will automatically shut off once the timer has
reached 0. The Operation Light and Display Window will remain
illuminated while the unit is plugged in.
The Lightwave oven may be shut off at anytime during any
function. To interrupt a function, press and hold the Start/Stop
button until the unit beeps and shuts off.
The Heating Elements also function as an interior light. During all
functions, except the Broil Function, the Upper and Lower
Heating Elements will cycle on and off. During Broil Function,
only the top element will cycle on and off.
Operating Instructions
Preset Functions
NOTE: All of the functions, except for the toast function, are
programmed with a default time and temperature. The default time
may be changed by turning the Time/Toast Color Dial. No preheat
is necessary.
1. Plug unit into a 120 V outlet. Place Wire Rack into desired Shelf
Position. Close the Glass Door. The Operation Light and the Display
Window will illuminate while the unit is plugged in.
2. Press the Function Button until the pointer is next to the desired
cooking function.
3. The default time will appear in the Display Window under the
Timer section. To change the time, turn Time/Toast Color Dial to
select the desired time. The time will go up or down by 1 minute at
a time. The maximum time is 120 minutes (2 hours).
Note: Some foods will cook up to 30% faster than the package time.
Set the timer for lesser time, check food and continue cooking if
necessary.