Filter
Top Products
7.
11. Unplug the Power Base when not in use. Allow it to cool before
reuse. Empty the Kettle after each use. Do not leave water in the
Kettle overnight.
Boil-Dry Protection
A safety thermostat will automatically operate should your Kettle be
accidentally plugged in without any water, or if the Kettle is without
sufficient water, or if the Kettle is allowed to boil dry. To reset the
boil-dry protection device, you must remove the Kettle from the
Power Base and allow it to cool before refilling with water.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Any servicing
requiring disassembly other than cleaning must be performed by a
qualified appliance repair technician.
Cleaning Your Express Kettle
CAUTION: Do not immerse Kettle or Power Base in any liquid, or
place in a dishwasher to be cleaned.
1. Raise the ON/OFF Lever into the OFF position and unplug unit.
Allow unit to cool before cleaning.
2. Open the Lid by pressing the Lid Release Button under the
handle and hold down.
3. Remove the Scale Filter
from inside the Kettle
(located just inside the
spout) by lifting it up and
out from the inside of
Kettle. (See Figure 4.)
Rinse under running water
and use a soft brush if
necessary. (Do not use a
metal brush.) Do not wash
in dishwasher. Place Scale
Filter back into position.
Figure 4
TMR_TMK17CAN_IB_9-8-05 8/9/05 10:30 PM Page 7