Filter
Top Products
2
CLEANING
The exterior surfaces can be kept clean and attractive by regularly wiping with a clean soft cloth. Any
discoloration can be removed with a non-abrasive cleaner.
For model TMPHE, the heating elements may be raised for access to the drip pans, which may be
removed for cleaning and the bottom pan may be removed by sliding pan forward.
REPLACEMENT OF INFINITE CONTROL
BE SURE POWER IS DISCONNECTED BEFORE ATTEMPTING TO SERVICE UNIT.
1. Pull control knobs on front panel forward to remove.
2. Remove 8 screws from front panel and tilt front panel forwards.
3. Remove the nut that mounts the inoperative control and pull the control to the side.
4. Remove one wire at a time from the inoperative control and connect at the same terminal
on the new control. Carefully check to see that proper wires have been connected to the
terminals of the control. See attached wiring diagram.
5.
Assemble new control to the front panel.
MAINTENANCE AND REPAIRS
Contact the factory or one of its representatives or a local service company for service or maintenance
if required.