Filter
Top Products
6. Make sure the Mug is in the recessed area under the Water Reservoir.
Press Power Switch to turn the Coffeemaker ON. The Indicator Light
will illuminate. Brew time is approximately 4 minutes.
CAUTION: Avoid contact with heated water.
IMPORTANT: Do not remove Mug until the Indicator light has turned
off and last drops of coffee flow into the Mug.
7. After Indicator Light turns off, the Mug may be safely removed.
8. If brewing more than one cycle, allow unit to cool for 4 minutes
between cycles.
NOTE: To stop the Coffeemaker during the brewing process, press the
Power Switch to OFF.
NOTE: Coffeemaker will shut-off automatically once the coffee brewing
cycle is completed.
Helpful Hints for Brewing
• Always use fresh, cold water for brewing. In areas with hard water or
where water contains a high mineral content, use cold filtered water for
optimal coffee taste.
• For best results, use the Removable Permanent Coffee Filter.
Descaling
We recommend that you descale your Coffeemaker once a month
because mineral deposits can form a coating in the Coffeemaker, causing
slower brewing time and possibly an off flavor in the coffee. Use a cleaner
recommended for Coffeemakers. To descale your unit:
1. Pour 2 ounces of vinegar or coffee cleaner into the Water Reservoir.
Add slightly less than one full Mug of water to allow for 2 oz. of vinegar.
2. Place the Removable Permanent Coffee Filter in the Removable Filter
Basket and close Lid. Place the Mug in the recessed area under the
Water Reservoir.
3. Follow “Brewing Coffee” (without coffee).
4. When the Indicator Light turns off, wait 15 minutes and pour solution
from Mug back into the Water Reservoir. Be sure that the Removable
Filter Basket is still in proper position.
5. Turn unit on again. Allow all solution to empty into Mug. When
Indicator Light turns off, discard solution.
6. Allow unit to cool 10 minutes. To rinse unit, fill Water Reservoir with
one Mug of fresh, cold water. Insert the Removable Permanent Coffee
Filter into Removable Filter Basket. Close Lid. Place the Mug in the
recessed area under the Water Reservoir and turn the power ON.
7. At end of cycle, allow unit to cool, discard water. Wash and dry Mug
and other removable parts.
8. Unplug the appliance from outlet. When the appliance has cooled,
wipe exterior with a damp cloth.
9
ADDITIONAL IMPORTANT
SAFEGUARDS
CAUTION HOT SURFACES: This appliance generates heat and
escaping steam during use. Proper precautions must be taken to
prevent the risk of burns, fires, or other injury to persons or damage to
property.
1. A person who has not read and understood all operating and safety
instructions is not qualified to operate this appliance. All users of
this appliance must read and understand this Owner’s Manual
before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 120 V AC
electrical outlet only.
3. Use water only in this appliance! Do not put any other liquids or
food products into the Water Reservoir. Do not mix or add anything
to the water placed in this appliance, except as instructed in the
User Maintenance Instructions to clean the appliance.
4. DO NOT attempt to move an appliance containing hot liquids.
Allow appliance to cool completely before moving.
5. Keep appliance at least 4 inches away from walls or other objects
during operation. Do not place any objects on top of appliance
while it is operating. Place the appliance on a surface that is
resistant to heat.
6. If this appliance begins to malfunction during use, make sure the
Power Switch is OFF (Indicator Light will not be illuminated) and
turn the Browning Selector Control to “Cancel” and immediately
unplug the cord. Do not use or attempt to repair the
malfunctioning appliance.
7. If this appliance falls or accidentally becomes immersed in water or
any other liquid, unplug it immediately. Do not reach into water! Do
not use this appliance after it has fallen into or has become
immersed in water. Contact Consumer Service for examination and
repair.
8. To reduce the risk of fire, do not leave this appliance unattended
during use.
9. The appliance must be left to cool down sufficiently before adding
more water in the Water Reservoir to avoid spattering.
10. Always use fresh, cool water in the Water Reservoir. Warm water or
other liquids, except as listed in the cleaning section, may cause
damage to the appliance. DO NOT lift Lid until brewing is complete
and all parts have cooled.
2
TMR_TMT2CMW_IB_27-3-07 3/27/07 4:09 PM Page 5