Filter
Top Products
Before First Use
1. Carefully unpack your Toaster and remove all packaging
materials.
2. To remove any dust that may have accumulated during packaging,
simply wipe the Toaster exterior with a clean, damp cloth.
3. Do not use abrasive cleansers.
4. Do not put the Toaster, cord or plug in water.
5. Plug power cord into a 120V AC electrical outlet.
6. Before toasting for the first time, operate both pairs of Toasting
Slots without bread and with both of the Browning Selector Knobs
set at Dark (#7), the maximum setting. This will help to burn off
any dust or manufacturing oils, etc. which may have accumulated
on the elements. The new elements may give off an unpleasant
smell but this is normal for a new Toaster. Make sure the room is
well ventilated while doing this.
Selecting Toast Color
Both Browning Selector Knobs are located on the front of your
Toaster. Adjust one or both of the Knobs to the desired toast color:
Light (#1) is for warming and very light toasting; Dark (#7) for dark
toasting. The numbers are a guide to help you select your desired
color (the higher the number, the darker the toast).
The first time you toast, it is best to use both pairs of Toasting Slots;
position the each Browning Selector Knob mid-way between Light
and Dark settings (#3 and #4); then adjust each subsequent toasting
to your preference.
Cancel Buttons
There are 2 CANCEL Buttons, one for each pair of Slots. If you wish
to stop the toasting cycle before it is complete, press the
corresponding CANCEL Button. The elements will be turned off, the
toast or toaster food will pop up.
5.
TMR_TMT4_IB_11-8-06 8/11/06 4:44 PM Page 5