Filter
Top Products
6. 7.
Automatic Rice Cooker Use and Care Guide
Instructions For Use
Cooking Rice
Many varieties of rice can be used, including basmati, wild, black rice,
arborio, risotto, saffron rice, brown, and long grain. We do not
recommend using instant rice with this Rice Cooker.
1. Measure the amount of rice that you would like to cook. A 180 ml
(3/4 cup) Rice Measuring Cup is included with your Rice Cooker.
Filling the cup with rice makes approximately 2 - 1/4 cups of
cooked rice.
NOTE: Make sure that the rice is leveled when the cup is filled.
The 7 Cup Automatic Rice Cooker has the capacity for 7 Rice
Measuring Cups of dry rice.
2. For Best Results: Pour desired amount of rice into a separate
container. Wash and rinse the rice until the rinse water is clear.*
3. Take the Inner Pot out of the Rice Cooker. Place the washed rice
into the Inner Pot and add appropriate amount of water. (If you
are making 7 cups of dry rice, add water to the “7” mark in the
inside of the Inner Pot.)
7
6
5
Use Rice Measuring Cup
provided to measure 7 level
Rice Measuring Cups of rice.
Rinse, if desired.
Add rice to the Cooking Pot
Add water up to the 7-cup line
4. Replace the Inner Pot back into the Automatic Rice Cooker’s Main
Housing. Rotate it slightly to make sure that it is well seated on the
Heating Plate.
NOTE: Make sure to always wipe down the outer surface of the
Inner Pot. If the Inner Pot is wet when placed into the Cooker, this
may cause a cracking noise while the unit heats up. Keep the outer
surface dry to prevent damage to the inner workings of the
appliance.
* For information regarding rinsing rice, please refer to General
Information on page 10.
5. Replace the Glass Lid.
CAUTION: Do not operate the Automatic Rice Cooker without
replacing the Lid. Burns or other serious injury may occur.
6. Plug the Automatic Rice Cooker into a 120V AC electrical outlet.
Press the Rice Cooking Selector Lever down and the COOK Light
will illuminate. The cooking process begins as soon as the Light
illuminates.
7. When the Automatic Rice Cooker is done cooking, the WARM
Light will illuminate. For best results, let the cooked rice sit for
15 minutes before stirring or removing. This allows the steam to
finish the cooking process.
8. Mix the rice.After rice has steamed for 15 minutes, carefully open
the Lid as steam will escape. Use the Rice Paddle provided or any
other non-metal long-handle utensil to scoop and mix the rice
well. Allow all steam to escape.
9. Keep Warm. When the cooking is completed, the Automatic Rice
Cooker will automatically go into the WARM Mode. At this time,
the WARM Light will illuminate.
NOTE: Do not warm rice for more than 12 hours. It is
recommended to consume the rice within a 12 hour period.
If the WARM Mode is not desired, simply unplug the Automatic
Rice Cooker from the wall. Do not touch the Main Housing or
Inner Pot until they have cooled completely.
10. Allow the Automatic Rice Cooker to cool completely before
cleaning.
11. When the Automatic Rice Cooker is not being used, please keep
it unplugged.