Filter
Top Products
4.
Pizzelle Maker Use and Care Guide
Using Your Pizzelle Maker
CAUTION: Never place any part of appliance in water or other liquids.
1. Before using your pizzelle maker for the first time, wipe the grids
with a damp cloth to remove all dust and dry. Follow instructions
for CONDITIONING GRIDS.
2. Unwrap the cord completely from unit, close lid and plug into 120 V ~
60 Hz outlet. The red power light will come on and stay on during use.
The green light will come on indicating that the unit is heating
(for models TWB2PIZ and TWB2PIZCAN). Allow to preheat
approximately 5 minutes. For model TWB2PIZT, the green light will
come on when unit is preheated. The green light will continue to come
on and go off during use. Initially, some smoking may occur. This is
normal for newly manufactured appliances and will not occur after the
first few uses. When preheated, the green light will turn off (for models
TWB2PIZ and TWB2PIZCAN). The grids are ready to use.
CAUTION: Appliance surfaces are hot during use.
3. Raise lid and carefully drop approximately a heaping teaspoon of batter
onto the center of each cookie section. Close the lid; do not latch. The
green light will cycle on and off while maintaining proper cooking
temperatures. While cooking, the red power on light will be on.
4. Allow to bake for 45-60 seconds. The exact baking time will be a
matter of recipe, taste, and your preference for browning.
5. Gently lift the lid to check for doneness. If lid shows resistance to
lifting, the cookies may not be quite done. Close lid and watch for
steaming to stop before checking again. Remove cookies with the
help of a plastic spatula.
6. When finished baking, unplug from the wall outlet and allow to
cool before cleaning. See CARE AND CLEANING
.
TMR_TWB2PIZT_IB_25-11-04 11/25/04 3:43 PM Page 4