Filter
Top Products
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048
Gigabit Ethernet Switch User Guide
10
Appendix B: Troubleshooting
1. The Power LED is not lit
¾ Make sure the AC power cord connected the Switch with power source
properly.
¾ Make sure the power source is ON.
2. The Link/Act LED is not lit when a device is connected to the
corresponding port
¾ Make sure that the cable connectors are firmly plugged into the Switch
and the device.
¾ Make sure the connected device is turned on and working well.
¾ The cable must be less than 100 meters long(328 feet).