Filter
Top Products
Project Quantity Item #
Model Specified: CSI Section 11400
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
SECTION
1-15
DIMENSIONAL DATA R/AIF132LUT R/AIF232LUT R/AIF332LUT
Net capacity cu. ft. 36.0 (1020 cu l) 74.3 (2105 cu l) 117.5 (3329 cu l)
Length - overall in. 35
1
⁄
2
(90.2 cm) 68 (172.7 cm) 100
1
⁄
2
(255.3 cm)
Depth - overall in. 35
9
⁄
16
(90.3 cm) 35
9
⁄
16
(90.3 cm) 35
9
⁄
16
(90.3 cm)
Depth - over body in. 32 (81.3 cm) 32 (81.3 cm) 32 (81.3 cm)
Depth - door open 90° in. 63
1
⁄
4
(160.7 cm) 63
1
⁄
4
(160.7 cm) 63
1
⁄
4
(160.7 cm)
Clear door width in. 27
1
⁄
8
(68.8 cm) 27
1
⁄
8
(68.8 cm) 27
1
⁄
8
(68.8 cm)
Clear door height in. 66
5
⁄
16
(168.4 cm) 66
5
⁄
16
(168.4 cm) 66
5
⁄
16
(168.4 cm)
Height - overall in. 83
1
⁄
4
(211.5 cm) 83
1
⁄
4
(211.5 cm) 83
1
⁄
4
(211.5 cm)
RIF Net Wt. lbs. 525 (238 kg) 820 (372 kg) 1130 (513 kg)
AIF Net Wt. lbs. 475 (215 kg) 720 (327 kg) 1090 (494 kg)
Rack Capacity - 66" High 1 2 3
ELECTRICAL DATA
Voltage 115/60/1 208-230/115/60/1 208-230/115/60/1
Feed wires with Ground 3 4 4
Full load amperes 11.5 9.4 15.8
REFRIGERATION DATA
Refrigerant R-404A R-404A R-404A
BTU/HR H.P.
1
2160 (
1
⁄
2
HP) 4710 (1 HP) 5560 (2 x
3
⁄
4
HP)
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35769 (revised 1/07)
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are
constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet
top, back and bottom are constructed of heavy gauge aluminized steel. The interior
floor is constructed of stainless steel and insulated with
3
⁄4" of resilient cork. A readily
attachable stainless steel ramp is provided to facilitate loading/unloading.
Doors are equipped with a heavy-duty, extruded wiper gasket for sealing to bottom
ramp, removable plug cylinder locks and guaranteed for life cam-lift, gravity action,
self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges
include a concealed switch to automatically activate the interior incandescent light-
ing. Guaranteed for life, work flow door handles are mounted horizontally over
recess in door which limits protrusion from door face into aisleways. Doors have
seamless, polished metal corners.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-404A
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil
located outside the food zone and a top mounted non-electric condensate
evaporator. Biased return air duct protects against introduction of warm kitchen air,
promoting even temperature maintenance and efficient operation. A 9'
cord and plug is provided. Standard operating temperature is 0 to -5°F.
Controller
The easy to use water resistant INTELA-TRAUL
®
microprocessor control system is
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, Defrost Lockouts, and an RS485 data port.
In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open,
Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power
Supply Interruption.
Interior
Readily removable, interior-mounted, stainless steel guides for rack are provided for
protection. Maximum rack size with wheels inboard of frame is 27" wide by 29" deep
by 66" high. Racks supplied by others.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard. An optional 2
nd
year extended parts
and labor warranty is also available. In addition the INTELA-TRAUL
®
control is
warranted by a two year parts and labor warranty.
Specifications
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1= Based on a 90 degree F ambient and -20 degree F evaporator.
2= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information
on remote models, please refer to spec sheet 12-2.
Plan - R/AIF132LUT
Elevation -
R/AIF132LUT
Section - All Models
Plan - R/AIF232LUT
Elevation -
R/AIF232LUT
Plan - R/AIF332LUT
Elevation -
R/AIF332LUT
REQUIRED CLEARANCES
In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.
NOTE: Full load amps and plug style may vary depending
on electrical options chosen and condensing unit employed.
One Section Models Equipped
With One NEMA 5-15P Plug
Two & Three Section Models Equipped
With One NEMA L14-20P Plug