Filter
Top Products
Project Quantity Item #
Model Specified: CSI Section 11400
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
SECTION
4-3
DIMENSIONAL DATA
1-Section Models 2-Section Models 3-Section Models
Net capacity cu. ft. 24.2 (686 cu l) 46.0 (1303cu l) 69.1 (1958 cu l)
Length - overall in. 29
7
⁄
8
(75.9 cm) 52
1
⁄
8
(132.4 cm) 76
5
⁄
16
(193.8 cm)
Depth - overall in. 35 (88.8 cm) 35 (88.8 cm) 35 (88.8 cm)
Depth - over body in. 32 (81.3 cm) 32 (81.3 cm) 32 (81.3 cm)
Depth - door open 90° in. 56
7
⁄
8
(144.5 cm) 56
7
⁄
8
(144.5 cm) 56
7
⁄
8
(144.5 cm)
Clear door width in. 21
1
⁄
8
(53.6 cm) 21
1
⁄
8
(53.6 cm) 21
1
⁄
8
(53.6 cm)
Clear half-door height in. 27
1
⁄
2
(69.9 cm) 27
1
⁄
2
(69.9 cm) 27
1
⁄
2
(69.9 cm)
Clear full-door height in. 57
5
⁄
8
(146.3 cm) 57
5
⁄
8
(146.3 cm) 57
5
⁄
8
(146.3 cm)
Height-overall on 6" casters
83
1
⁄
4
(211.5 cm) 83
1
⁄
4
(211.5 cm) 83
1
⁄
4
(211.5 cm)
No. Standard Shelves 3 6 9
Shelf area sq. ft.
1
18.8
(1.75 sq m)
34.6
(3.21 sq m)
51.9
(4.82 sq m)
ELECTRICAL DATA
Voltage 115/60/1 115/60/1 115/60/1
Feed wires with Ground 3 3 3
Full load amperes 7.3 12.0 15.0
REFRIGERATION DATA
Refrigerant R-134a R-134a R-134a
BTU/HR H.P.
2
2410 (
1
⁄
3
HP) 4160 (
1
⁄
2
HP) 5330 (
3
⁄
4
HP)
SHIPPING DATA
Length - crated in. 35 (89 cm) 63 (160 cm) 91 (231 cm)
Depth - crated in. 43 (109 cm) 43 (109 cm) 43 (109 cm)
Height - crated in. 83
1
⁄
2
(212 cm) 83
1
⁄
2
(212 cm) 83
1
⁄
2
(212 cm)
Volume - crated cu. ft. 71 (2011 cu l) 131 (3711 cu l) 189 (5354 cu l)
Net Wt. lbs. 305 (138 kg) 450 (204 kg) 720 (327 kg)
Gross Wt. lbs. 395 (179 kg) 590 (268 kg) 900 (408 kg)
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35789 (revised 6/08)
Construction, Hardware and Insulation
Cabinet exterior front and louver assembly are constructed of 20 gauge stainless
steel. Cabinet sides (including returns) and interior are constructed of anodized
aluminum. The exterior cabinet top, back and bottom are constructed of heavy gauge
aluminized steel. A set of four (4) 6" high casters are included.
Doors are equipped with removable plug cylinder locks and guaranteed for life cam-
lift, gravity action, self-closing metal, glide hinges with stay open feature at 120
degrees. An exterior mounted switch is provided to operate the interior incandescent
lighting. Each door includes a vertically mounted stainless steel handle.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
The cabinet is insulated with an average of 2" thick high density, non-CFC, foamed in
place polyurethane.
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-134a
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, large, high humidity evaporator coil located outside the food
zone and a top mounted non-electric condensate evaporator. A 9' cord and plug is
provided. Standard operating temperature is 34 to 38°F.
Controller
The easy to use water resistant microprocessor control system is supplied standard.
It includes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale
Display Capability.
Interior
Standard interior arrangements include three (3) epoxy coated wire shelves per
section, mounted on shelf pins, installed at the factory. Shelves are full-width, and
do not have any large gaps between them requiring the use of "bridge" or "junior
shelves." Recommended load limit per shelf should not exceed 225 lbs.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard. An optional 2
nd
year extended parts
and labor warranty is also available.
Specifications
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1= Figure shown reflects the area of standard shelf compliment plus the additional storage area available on
the cabinet bottom.
2= Based on a 90 degree F ambient and 20 degree F evaporator. For remote data please refer to spec sheet
13-2.
Plan - Two-Section
Plan - Three-Section
Plan - One-Section
Equipped With One NEMA 5-15 P Plug
(one & two section models only)
Section - All Models
Elevation
One-Section
Elevation
Two-Section
Elevation
Three-Section
Equipped With One NEMA 5-20 P Plug
(three section models only)
REQUIRED CLEARANCES
In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.