Filter
Top Products
Project Quantity Item #
Model Specified: CSI Section 11400
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
E-MAIL: Website: www.traulsen.com
SECTION
7-1
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties. For fast order entry: Fax 1 (800) 765-8728.
Continued product development may necessitate specification changes without notice.
Part No. TR35803 (revised 1/07)
Construction, Hardware and Insulation
Cabinet exterior, including front, one piece sides, louver assembly and door(s) are
constructed of heavy gauge stainless steel. Cabinet interior and door liners are
constructed of stainless steel with #3 and 2-B finish. Exterior cabinet top, back and
bottom are constructed of 18 & 20 gauge stainless steel with #3 finish. A set of four
(4) 6" high heavy duty poly casters with stress pads are included, two fixed and two
swivel with brake.
Doors are equipped with 12 gauge stainless steel .320 diameter pin hinges. Door
opens to 270 degrees and is provided with a "door hold open" latch to allow for easy
loading and unloading of product. A full length vertical door handle is included for
ease of use.
Vinyl magnetic door gasket assures tight door seal. Door contains high density, non-
CFC, polyurethane insulation.
Refrigeration System
A bottom mounted, self-contained, balanced refrigeration system using R-404A
refrigerant is conveniently located behind two, one piece louver assemblies. A high
humidity evaporator coil is located out of the food zone.
Air Curtain
Air circulating fans and forced convection system cooling coil are ceiling mounted.
With the door opened, a curtain of air is created producing a unique circulation
pattern within the food zone, allowing the unit to maintain a 45°F or lower interior
temperature for 45 minutes based on ambient temp of 70°F/45% RH/120V. When
the door is closed, interior air-flow pattern design prevents hot pockets and cool
spots within the cabinet. Pull down time to 35°F is achieved in approximately
17 minutes. An automatic defrost cycle or the use of the "On-Demand Defrost"
allows the operator to defrost the coils of ice that may accummulate while the door is
left open. The operator may over-ride defrost in progress.
Interior
Ten (10) pairs of removable tray slides each accommodate one 18" x 26" pan at 4
1
⁄2"
spacings.
Warranties
The standard warranty includes a five year compressor warranty and a one year
parts and labor warranty on all components and the cabinet. Additional warranties
are available at extra cost.
Specifications
Equipped With One NEMA 5-20P Plug
DIMENSIONAL DATA RAC37
Width - Overall in. (including bumper) 32
1
⁄4 (81.9 cm)
Depth - Overall in. (including bumper) 39 (99.1 cm)
Height - Overall on 6" Casters in. 79
1
⁄4 (201.3 cm)
Depth - Cabinet only in. 32
5
⁄8 (82.9 cm)
Depth - Cabinet only including door in. 36
1
⁄4 (92.1 cm)
Width - Cabinet only in. 28
5
⁄8 (72.7 cm)
Clear full door height in. 43
3
⁄4 (111.1 cm)
Clear door width in. 18
3
⁄8 (46.7 cm)
Net Weight - uncrated lbs. 410 (190 kg)
ELECTRICAL DATA
Voltage 120/60/1
Feed Wires (8' cord & plug with ground) 3
Wattage 1668
Full Load Amperes (running) 14.3
HP
1
⁄2 HP
REFRIGERATION DATA
Refrigerant R-404A
Oil Specifications Polyol Ester Oil
CAPACITY
Max 10 each of 18" x 26" or 12" x 20" pans at 4
1
⁄2" spacings
RAC37-FHS Front View RAC37-FHS Side View
Full load amps and plug style may vary depending on electrical
options chosen and condensing unit employed.
Note: Figures in parentheses reflect metric equivalents