Filter
Top Products
VII. MICROPROCESSOR CONTROL (continued)
-12-
VII. k - SETTING THE DATE:
The date must be set in order for the data storage memory to correctly log events. Follow the instructions to enter the
service access code on page 8. When the control displays Thermostat Set Point High, press the down arrow
key until the control display reads Date. Press the set button . The display will show
(year). The right two numbers will be ashing. Press the arrow keys to set the year. When the
correct year is displayed, press the set button . The display will show (month). The right two num-
bers will be ashing. Use the arrow keys to set the month. When the correct month is displayed, press
the set button . The display will show (day). The right two numbers will be ashing. Press the arrow
keys to set the day. When the correct day is displayed, press the set button . The display will then
read Date. You can use the up or down arrow keys to scroll to the next parameter, press the
alarm cancel button to exit .
VII. l - SETTING DAYLIGHT SAVINGS TIME:
This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings Time. Follow the in-
structions to enter the customer access code on page 8. When the control displays Thermostat Set Point High,
press the down arrow key until the display reads Daylight Savings Time. Press the set button
. The display will show Daylight Savings Time (Yes, automatically adjust for Daylight Savings Time).
For “YES” press the set button ,for “NO” press the up or down arrow key . The display will read
Daylight Savings Time (no). Press the set button . The display will read Daylight Savings
Time. You can press the up or down arrow keys to scroll to the next parameter or press the alarm cancel
button to exit .
SET
SET
SET
SET
)
)
)
SET
SET
SET
)
)
)