Filter
Top Products
8
Disassembling the Z-610 Manual Juicer
1. Separate the Screen Locking Cap and Nozzle from the unit by turning clockwise.
2. Pull to remove the assembled Screen.
3. Turn the Auger Housing Retaining Ring counter-clockwise to separate from the base.
4. Remove Auger from the Auger Housing.
Cleaning the Z-610 Manual Juicer
1. Be sure to clean and properly store the parts of the unit after every operation. When
the Screens are not cleaned immediately after every use, the residue can get dried,
blocking the holes from filtering and juicing.
2. Use lukewarm water with mild detergent. Do not use hot water or any harsh chemi-
cals such as bleach. It may result to deformation of parts.
3. To remove colored stains, soak parts in 70% White Wine Vinegar and 30% Water.