Tricity Bendix BD 912/2 Oven User Manual


 
TO FIT THE MAIN OVEN SHELVES
The shelves should be fitted with the straight rods
uppermost on the frame and the forms towards the
back of the oven. If not fitted correctly the anti-tilt and
safety stop mechanism will be affected. Only use
straight shelves in the main oven.
HINTS AND TIPS
Arrange the shelves in the required positions
before switching the oven ON. Shelves are
numbered from the bottom upwards.
When cooking more than one dish in the fan
oven, place dishes centrally on different shelves
rather than cluster several dishes on one shelf,
this will allow the heat to circulate freely for the
best cooking results.
If it is unavoidable that several dishes are placed
on the shelves, for your safety DO NOT withdraw
the shelf when removing food or dishes from the
oven.
When batch baking one type of food, e.g. Victoria
sandwich cakes, those of similar size will be
cooked in the same time.
Do not use the cranked shelf from the grill in the
main oven.
It is recommended that when baking larger
quantities, the shelf positions should be evenly
spaced to suit the load being cooked. A slight
increase in cooking time may be necessary.
DO NOT place baking trays directly on the oven
floor as it interferes with the oven air circulation
and can lead to base burning; use the lower shelf
position. However, non critical dishes may be
placed on the oven base when more space is
required.
The use of excessively high temperatures can
cause uneven browning. It may be necessary to
reduce temperatures slightly. Refer to the
recommendations given in the oven cooking
chart, see page 27.
26
Straight Rods
Frame
Back of the oven