Filter
Top Products
14
B) TO SET THE TIMER TO SWITCH OFF
ONLY
i) Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g.
10.00am as Fig. 9.
Place food in the oven.
iii) To set the length of cooking time, press the
Selector Control button until the 'Cook Time'
( ) indicator is illuminated. Press the increase
control ( ) until the required length of cooking
time is displayed, e.g. 2 hrs 15 mins as Fig. 10.
Depress the decrease control ( ) if necessary.
iv) Release the buttons. The 'Cook Time' indicator
( ) will illuminate and the time of day will be
displayed after 5 seconds.
v) Set the oven temperature. The oven indicator
neon should be ON.
vi) To check the 'End Time' during the cooking
period, simply press the Selector Control button
once and the remaining time will be displayed, as
Fig. 11.
4. TO CANCEL AN AUTOMATIC
PROGRAMME
i) To cancel an automatic programme press the
Selector Control button until the 'Cook Time'
indicator ( ) neon flashes. Press the decrease
control ( ) until the display reads 0.00 as Fig.
12.
ii) Release the buttons. The 'Cook Time' indicator
( ) will flash and after 5 seconds return to the
time of day.
iii) Turn off the oven control.
5. TO RETURN THE APPLIANCE TO
MANUAL
At the end of a timed cooking period, the
indicator neon will flash and an alarm will sound
for up to 2 minutes.
i) To stop the sound press any of the three buttons,
as Fig. 13.
ii) The display will return to the time of day.
iii) Turn off the oven controls.
Fig.9.
Fig.11.
Fig.12.
Fig.13.
Fig.10.