Filter
Top Products
4
DESCRIPTION OF THE APPLIANCE
A
B
C
D
E
F
G
I
H
FAST
A- Thermostat control
B- Dairy compartment
C- Storage shelf
D- Bottle storage shelf
E- Freezing/Storage compartment
F- Freezing fresh food compartment
G- Salad drawers
H- Glass shelf
I - Wire shelves
17
Door reversal directions
1. Disconnect from the electricity supply.
2. Remove all loose items, including food, store food
in a cool place.
3. Gently lay the fridge/freezer on its back with the
top held away from the floor by 5-8 cm (2-3
inches) of packing;
4. Remove the feet (2-3)
5. Remove bottom hinge (1).
6. Slide out the lower door from middle hinge (H)
and remove the latter.
7. Slide out the upper door from pin (G), unscrew
the latter and then screw it down into the hinge
provided on the opposite side, after having
removed the small plugs which should then be
fitted on the opposite side.
Unscrew the handle. Refit it on the opposite side
after having pierced the plugs with a punch. Cover
the holes left open with the plugs contained in the
documentation pack.
8. Refit the upper door and the middle hinge on the
opposite side.
9. Refit the lower door and bottom hinge (1) on the
opposite side.
10.Refit the feet (2-3)
Attention
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdrier.
G
H
PR220
D715 PIED/M
1
2
3