Filter
Top Products
B) To Set The Timer To Switch Off Only
i) Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g.
10.00am as Fig. 9.
ii) Place food in oven.
iii) To set the length of cooking time, press the
cooking hours button ( ) and while holding it
down, turn the increase control ( + ) until the
required length of cooking time is displayed, e.g.
2 hrs 15 mins as Fig. 10. Turn the decrease
control (-) if necessary.
iv) Release the buttons. The Cooking Symbol and
the AUTO symbol will glow and the time of day
will be displayed.
v) Set the oven temperature.
vi) To check the stop time during the cooking
period, simply press the stop time button
( ) and the stop time will be displayed, as Fig.
11.
4. To Return The Appliance To Manual After An
Automatic Programme
To return the appliance to manual operation after an
automatic programme, follow the steps given below.
At the end of a timed cooking period, the AUTO
symbol will flash and a bleeper will sound for up to 2
minutes. This can be stopped by pressing any of the
buttons as Fig. 12.
Turn oven control to the OFF position. The AUTO
symbol will continue to flash.
Press ( ) button. The AUTO symbol will go out as
Fig.13.
Fig. 9
Fig. 11
Fig. 10
Fig. 12
Fig. 13
17