Filter
Top Products
12. Refit the top door by carefully sliding it onto
the upper hinge pin (P).
13. Turn the centre hinge (H) around from its
illustrated position and transfer it to the
opposite side. Gently press the centre hinge
up into the door.
To secure the centre hinge to the cabinet, refit
screw (J). Ensure the top door is correctly
aligned before fully tightening the screws (J)
and(G). This can be achieved by sideways
movement of the centre hinge.
14. Refit the bottom door by sliding it onto the
centre hinge pin. Take the bottom hinge foot
assembly (B) and transfer it over to the
opposite side of the cabinet, being careful to
retain any spacer washers fitted onto the
bottom hinge pin. Push the hinge foot
assembly (B) into the door bearing using the
pin of the foot for location. Three holes will
then line up with the hinge foot and screws (C)
should be used to secure the hinge. Refit
level adjuster and spacer (A) in the opposite
side of the cabinet.
15. The base of your product should now be in
line with the diagram.
16. Stand the appliance upright.
21
A
B
C