NOTES ON TIME DELAYED COOKING:
MULTI-STAGE COOKING TIME DELAYED COOKING
You can use a single program, a multistage program or an You
You can combine two cooking processes in a multi- stage You can preset the time at which the cooking process starts.
can Auto-cook menu. You cannot use Express or Basic cooking.
programme. There are two main uses for this process.
A Make sure the clock is set to the correct time
Do not use raw or frozen fish products or foods which may
A Cook food for a period at one power setting and then finish
B Input the cooking program. Do NOT press the START button
deteriorate during the waiting period.
with another power setting. You can for example, cook food and
C Set the clock to the required start time -see Page 3
Do not use time-delayed cooking with a defrost programme.
then keep it warm by setting a low power for the second process
D Press START/QUICK START to set the programme.
The clock must be set!
B Defrost food and then cook it in one combined process.
Example: Cook food at 50% power for 10 min starting at21:20
QUERIES
After the first stage, the buzzer will sound once and the next
stage will automatically start.
$During cooking: press the POWER button to briefly display
$Press the Power Setting
the microwave power in the current programme.
button.
If you are defrosting food, this must always be
$During cooking: press the CLOCK button to briefly display
the first process.
the clock time.
The Auto-Cook program cannot be combined
$Select 50% power.
$In Time Delay mode:
with a multi-stage cooking process.
$Press Start/+30SEC./Confirm
$Rotate the Function knob
$Every time you press a button, the oven will beep once. If the
1 Press W.T/Time Defrost
to set 10 minutes
button is not fully depressed, or the action is not part of the
Twice
process you will not hear a beep and nothing will happen..
$When you first rotate the Function knob in either direction
$Press the
Clock/Pre-set button
during a cooking process the oven will beep once.
2 Dial in the time
$When setting a cooking process, if you do not confirm the
$Rotate the Function
process by pressing the Start/+30SEC./Confirm button
3 Press the Power Setting
knob to select 21 hours.
within one minute, the process will be cancelled and the
button
oven will revert to displaying the clock time.
$Press the Clock/Pre-set
4 Rotate the Function knob
button again.
to select 50% power
$Before inputting any cooking process, it is good practice to
$Rotate the Function
press the Stop/Clear button twice to clear the oven memory.
5 Press Start/+30SEC./Confirm
knob to select 20 minutes
TROUBLESHOOTING: If the oven fails to operate:
$Press Start/+30SEC./Confirm
$Check that the oven is plugged in securely. If it is not, unplug
6 Rotate the Function knob
from the outlet, wait 10 seconds and plug it in again securely.
to set 10 minutes
$Check for a blown fuse or a tripped circuit breaker. If these are
The display reverts to clock time: When the preset time comes
intact, test the outlet with another appliance.
7 Press Start/+30SEC./Confirm
the buzzer sounds twice and the oven will begin the programme.
$Check that the clock is set and that the child lock is off.
When Time Delayed coking is preset:
$Make sure that the oven door closes fully and securely.
$ You cannot operate other oven functions.
If none of the above rectifies the situation, contact the Tesco
$Press Stop/Clear to clear a Pre-set program and revert to
The defrost cycle will commence. When the defrost cycle has
helpline. Do not try to adjust or repair the oven yourself.
normal operation.
ended the oven will move on to the cooking process.
pressing the CLOCK button will briefly
display the start time of the pre-set process.
Example: Defrost the food for 20 minutes, then cook at 50%
DISPLAYS AND OVEN STATES
microwave power for 10 minutes.
$ The buzzer will sound five times to remind you when cooking
is finished.
Further Information
Further Information
X2
Defrost
W.T/Time
X2
Setting
Power
Start/
+30SEC./Confirm
Start/
+30SEC./Confirm
Setting
Power
X2
Clock/Pre-set
Clock/Pre-set
Start/
+30SEC./Confirm
Start/
+30SEC./Confirm