Filter
Top Products
Shelf
Standards
Thumb
Screw
Thumb
Screw
Ceiling of Cabinet
Shelf
Shelf
Standards
Shelf
Clip
Shelf
............ www.truemfg.com ............
True Food Service Equipment, Inc.
12
12
HEATED CABINET SHELVING INSTALLATION/
OPERATION
INSTALLATION / OPERATION INSTRUCTIONS
SHELF INSTALLATION:
A. Hook shelf clips onto shelf standards.
B. Position all four shelf clips equal in distance
from the floor for flat shelves.
C. Shelves are oriented so that cross support bars
are facing down.
D. Place shelves on shelf clips making sure all cor-
ners are seated properly.
INSTALLING SHELF STANDARDS IN
HEATED CABINETS:
(See Image 2)
A. When installing shelf standards make sure the
numbers on the standards are facing up. These
numbers help with installing shelf clips at a level
height.
B. All standards are installed in the upper most
threaded hole near the ceiling of the cabinet. This
will leave a threaded hole vacant below each shelf
standard. A plastic plug is provided to cover the
open threaded slot.
Image 1
Image 2