Filter
Top Products
............ www.truemfg.com ............
............ www.truemfg.com ............
True Food Service Equipment, Inc.
True Food Service Equipment, Inc.
11
11
11
11
REQUIRED TOOLS:
• Phillips Screwdriver
• Stiff Bristle Brush
• Adjustable Wrench
• Vacuum Cleaner
Step 1
Disconnect power to unit.
Step 2
Remove the rear grill by backing out two screws.
(See image 3).
Step 3
Remove bolts anchoring compressor assembly
to frame rails and carefully slide out. (tube
connections are flexible)
Step 4
Clean off accumulated dirt from the condenser coil
and the fan with a stiff bristle brush. (See image 1).
Step 5
Lift cardboard cover above fan at plastic plugs and
carefully clean condenser coil and fan blades.
Step 6
After brushing condenser coil vacuum dirt from
coil, and interior floor. (See image 2)
Step 7
Replace cardboard cover. Carefully slide
compressor assembly back into position and
replace bolts.
Step 8
Reinstall rear grill assembly onto unit. Tighten all
screws.
Step 9
Connect unit to power and check to see if
compressor is running.
MAINTENANCE, CARE & CLEANING
MAINTENANCE, CARE & CLEANING
MAINTENANCE, CARE & CLEANING
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be followed, including the following:
Image 1.
Image 3.
Image 4.
Image 2.