Filter
Top Products
u-line.com 11
Wine Rack Removal/Installation
To remove a rack from the cabinet:
1. Grasp the end of the rack, and gently slide it out until it stops.
2. Remove any bottles stored on the rack.
3. Press the left rack release lever (Figure 1) down, and at the
same time, lift the corresponding right rack release lever up,
and pull the rack out until it is free of the tracks and the
cabinet.
Figure 1. Rack Removal/Installation
NOTICE
Do not remove the track side rails from the cabinet.
To insert a rack in the cabinet:
1. Align the left and right rack channels with the tracks in the
cabinet, and ensuring an even track engagement on both sides,
gently push the rack into the cabinet until it stops.
2. Before reloading the rack, ensure proper operation of the
travel stops in the left and right track rails by pulling the rack
out gently until it completely stops.